Results: 11 - 15 of 15
... - Fixed an issue that sometimes caused the camera to stop responding when attached to a WR?R10 wireless remote controller running firmware version 3.00. Updating the Camera Firmware: - Save and run the downloadable file to ... memory card that has been formatted in the camera. - Insert the memory card into the ...
... issue that resulted in unreliable connections between the camera and the iOS 10.2 version of the SnapBridge app. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The camera's A and B firmware versions will be displayed. ...
... may not be displayed correctly. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The camera's A and B firmware versions will be displayed. - Turn off the camera. Installation Procedure: - Download and extract ...
... the other as a transmitter, update both to firmware version 1.01. - When used as a transmitter to change ISO sensitivity for a receiving camera, the WR-1 no longer cycles continuously through the available values. WR-1 firmware updates can be performed with: - D5, D4S, ... D810, D800, D800E, D750, D500, D7200, and D7100 cameras - Other cameras cannot be used to ...
... the standby timer or after turning on the camera would not activate the AF-assist illuminator. The following cameras can be used to update SB-5000 firmware: - The D5, D4S, and Df - ... D3300 Be sure to update to the camera firmware for the following cameras to the latest ...