| File size: | 23.20 MB |
| Released: | May 19, 2016 |
| Downloads: | Total: 92 | This Week: 0 |
| Tags: |
- Setup Menu: The language that is set may not be displayed correctly.
- Turn on the camera.
- Press the camera’s MENU button and select Firmware version from the setup menu.
- The camera's A and B firmware versions will be displayed.
- Turn off the camera.
- Download and extract the new firmware
- Copy the firmware to the memory card
- Insert the memory card containing the firmware into the camera memory card slot.
- Turn the camera on. If you are updating flash unit firmware, turn the flash unit on as well.
- Press the to display the menus.
- Select Firmware version in the setup menu.
- The current firmware version will be displayed. Highlight Update and press the .
- A firmware update dialog will be displayed. Select Yes.
- The update will begin. Follow the on-screen instruction during the update.
- Confirm that the update was completed successfully.
- Turn the camera off and remove the memory card.
- Format the memory card in the camera.
- Remove the memory card
- Turn the device off
- Operate device controls
- Attach or remove lenses, mount adapters, or flash units
- Unplug or disconnect the AC adapter
- Remove the battery
- Subject the device to powerful electromagnetic noise
Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance
Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...
Changes: - Fixed an issue that prevented additional deletions after multiple shots had been deleted in succession from a single burst of pictures. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The ...
Changes:- Fixed an issue that caused the display to flicker if pictures were scrolled during playback zoom after the user had taken pictures using the viewfinder with Prioritize viewfinder selected for monitor mode and then removed his or her eye from the viewfinder before starting playback. - Fixed an issue that ...
New Features: - The WT-7 wireless transmitter is now supported. Fixed the following issues: - Multiple exposures were not recorded correctly. - Incorrect histograms would be displayed for some images viewed in the RGB histogram display during playback. - If On was selected for Auto distortion control, distortion ...
Fixed the following issues:- Waking the camera by pressing a control such as the AF-ON button after the standby timer had expired would in very rare instances cause camera settings to change or shooting would to start without the shutter-release button being pressed. - The shutter release would in very rare ...
Changes: - Fixed an issue that sometimes resulted in incorrect exposure for the first photo taken in live view. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version. ...
Changes:- When users attempted to pair the camera with the smart device using the SnapBridge app under iOS 13, pairing would end in failure and a message to that effect would be displayed. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to ...
Recall shooting functions:- Added Recall shooting functions to the functions that can be assigned to camera controls. Holding the selected control recalls previously-saved exposure settings (including shutter speed and aperture), a feature that can for example be used to switch rapidly between scenes that require different exposures. - Recall shooting ...
Changes:- The SETUP MENU > Time zone and date > Time zone display now shows only the names of major cities in the currently selected zone.Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version in the SETUP MENU to ...
This package contains the files needed for installing the Wireless Transmitter utility to adjust network settings. If your computer is currently running an older version of this utility, updating may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible, we do not recommend applying ...