... now takes effect during movie recording if: the camera is in mode P (programmed auto), S (shutter-priority auto), or A (aperture-priority auto), or the camera is in mode M (manual) and On is ... that resulted in photographs taken using radio-controlled Advanced Wireless Lighting being overexposed if a face was detected ... (programmed auto) with a flash mounted on the camera under conditions in which f/32 would normally be ...
... now takes effect during movie recording if: the camera is in mode P (programmed auto), S (shutter-priority auto), or A (aperture-priority auto), or the camera is in mode M (manual) and On is ... that resulted in photographs taken using radio-controlled Advanced Wireless Lighting being overexposed if a face was detected ... Auto-area AF selected for AF-area mode. Viewing the Camera Firmware Version:- Turn the camera on. - Press ...
... Confirming the firmware version: - Connect the camera and WT-7 using a USB cable and turn both devices on. - Press the camera MENU button and select Network >Options >Firmware version ... Check the WT-7 firmware version. - Turn the camera and WT-7 off. Basic Upgrade instructions: ... named “WT7Update” that contains a .bin package (the wireless transmitter firmware) - Using a card slot or ...
New Features: - The WT-7 wireless transmitter is now supported. Fixed the following ... On was selected for Auto distortion control, the camera would stop responding when the user attempted to ... would sometimes not be recorded. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and ...
New Features: - The WT-7 wireless transmitter is now supported. Fixed the following ... On was selected for Auto distortion control, the camera would stop responding when the user attempted to ... would sometimes not be recorded. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and ...
New Features: - The WT-7 wireless transmitter is now supported. Fixed the following ... would sometimes not be recorded. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version. - Check the camera firmware version. ...
New Features: - The WT-7 wireless transmitter is now supported. Fixed the following ... to firmware version 1.02 resets menu settings for cameras with firmware that displays as “A X.XX”, “B ... Select Save/load settings > Save settings in the camera SETUP MENU to save settings to the memory ... to reload the saved settings. Viewing the Camera Firmware Version: - Turn the camera on. ...
... Firmware Version 1.00 to 1.10 - The camera can now record movies up to 29 minutes ... during viewfinder photography. - Viewfinder Photography Autofocus: Improved camera response when the button assigned Auto-area AF using ... - If movie recording is started while the camera is focusing in movie live view, the camera ...
... - Fixed an issue that occurred with WR-R10 wireless remote controller firmware version 3.00. In rare cases, the camera would fail to display the number of exposures ... when the WR-R10 was connected. Viewing the Camera Firmware Version - Turn the camera on. - Press the camera MENU button and select Firmware version in the ...
... - Fixed an issue that sometimes caused the camera to stop responding when attached to a WR?R10 wireless remote controller running firmware version 3.00. Updating the Camera Firmware: - Save and run the downloadable file ... memory card that has been formatted in the camera. - Insert the memory card into the ...