Nikon D810 Camera Firmware 1.12

Details

File size: 18.30 MB
Released: Mar 7, 2017
Downloads: Total: 281 | This Week: 0
Tags:

Nikon D810 Camera Firmware 1.12 - Description

New Features:

- The WT-7 wireless transmitter is now supported.

Fixed the following issues:

- Multiple exposures were not recorded correctly.

- Incorrect histograms would be displayed for some images viewed in the RGB histogram display during playback.

- If On was selected for Auto distortion control, distortion would appear at the edges of photos taken with NEF (RAW) + JPEG fine selected for Image quality and Medium selected for JPEG/TIFF recording > Image size.

- Photos taken immediately after lenses were exchanged would not be recorded at the correct exposure.

- The protect icon did not display correctly.

- If On was selected for Auto distortion control, the camera would stop responding when the user attempted to take pictures with NEF (RAW) + JPEG fine selected for Image quality, Small selected for NEF (RAW) recording > Image size, and RAW primary - JPEG secondary selected for Secondary slot function.

- Shutter speeds for the electronic front-curtain shutter would sometimes be faster than 1/2000 s.

- Pictures would sometimes not be recorded.

Viewing the Camera Firmware Version:

- Turn the camera on.

- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.

- Check the camera firmware version.

- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.

- Save the downloadable file to the newly-created folder.

- Run the package to extract a .bin file (the camera firmware) to a folder named “D810Update”

- Using a card slot or card reader, copy .bin file to a memory card that has been formatted in the camera.

- Insert the memory card into the Slot 1 on the camera and turn the camera on.

- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.

- Once the update is complete, turn the camera off and remove the memory card.

- Confirm that the firmware has been updated to the new version.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

Windows 10 Nikon D810 Camera Firmware 1.12 related drivers

Nikon Camera NX Studio Utility 1.2.0

NX Studio software offers a full-fledged suite of intuitive tools for viewing, processing, and editing photos and videos. It combines the photo-and-video-viewing features of ViewNX-i with the photo-processing and retouch tools of Capture NX-D in a single, comprehensive workflow. Not only can it be used to process RAW pictures, ...

Nikon D610 Camera Firmware 1.03

Fixed the following issues:  - The SETUP MENU > Time zone and date > Time zone display now shows only the names of major cities in the currently selected zone. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version ...

Nikon COOLPIX P900 Camera Firmware 1.5

Changes:- The display when Home time zone or Travel destination is selected in the Set up > Time zone and date > Time zone sub-menu now shows only the names of major cities in the currently selected zone. Viewing the Camera Firmware Version - Turn the camera on. - Press ...

Nikon COOLPIX S7000 Camera Firmware 1.1

Fixed issues: - Improved image quality during HDMI output. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left to display menu icons, then highlight Set up and press OK. - Highlight ...

Nikon COOLPIX P1000 Camera Firmware 1.5

Changes:- Fixed an issue that caused horizontal lines to appear in pictures taken with Subject tracking in Continuous H mode. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left to display menu ...

Nikon COOLPIX P1000 Camera Firmware 1.2

Changes:- When the battery was charged using the charging AC adapter, the charge lamp would not stop flashing when charging was complete. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left to ...

Nikon Camera NX Studio Utility 1.6.0

NX Studio software offers a full-fledged suite of intuitive tools for viewing, processing, and editing photos and videos. It combines the photo-and-video-viewing features of ViewNX-i with the photo-processing and retouch tools of Capture NX-D in a single, comprehensive workflow. Not only can it be used to process RAW pictures, but ...

Nikon D5600 Camera Firmware 1.10

New Features:- The camera now also supports direct Wi-Fi connections to devices running SnapBridge. - Fixed the following issue: Touch Fn would sometimes not be available. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. ...

Nikon D3400 Camera Firmware 1.12

New Features: - Improved pairing and connectivity between the camera and Android versions of the SnapBridge app. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The camera's A and B firmware versions ...