| File size: | 143.50 MB |
| Released: | May 23, 2023 |
| Downloads: | Total: 17 | This Week: 0 |
| Tags: |
- When creating custom Picture Controls, use RAW images taken with your camera to preview the effect. The color reproduction in pictures shot using custom Picture Controls created with images from other cameras may differ from the preview.
- When importing custom tone curves created with existing applications, this software will load only the first 20 anchor points, starting from the white point. Any additional points will be lost.
- Picture Control Utility 2 cannot be launched while Picture Control Utility is running; exit Picture Control Utility before launching Picture Control Utility 2. Similarly, Picture Control Utility cannot be launched while Picture Control Utility 2 is running.
- Changes made with other Nikon software are not reflected in Picture Control Utility 2.
- Depending on the model of the camera you use and the model of camera with which the picture was taken, you may be unable to use NEF/NRW (RAW) files created with other cameras as previews, in which case the default image will be used instead.
- Create a folder on the hard disk and name it as desired.
- Download the software to the folder created in Step 1.
- Run the software to launch the installer.
- Allow Windows to run the file (if necessary).
- Read and agree with the License Agreement to proceed with the installation process.
- Follow the on-screen instructions to complete installation.
- Close the wizard and perform a system reboot to allow changes to take effect.
Updating to a different firmware version than the one already installed on the adapter can bring various changes such as improved performance and stability, add new features or enhance existing ones, but also various fixes for more or less recurrent issues.
Given the large variety of camera adapters and numerous methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you consider applying the new firmware, even if you are a power user.
If you try to perform the update without knowing all the steps, you risk ending up with a broken device. However, what every upgrade needs is a compatible firmware to be transferred to the adapter (or to the camera) via either a USB cable or a suitable memory card.
That being said, if you consider applying this release and have made sure you're properly informed on the process of performing the upgrade successfully, hit the download button, and update your camera adapter.
Check with our website as often as possible in order to be up to date with the latest releases.
Changes:- Fixed an issue that caused the display to flicker if pictures were scrolled during playback zoom after the user had taken pictures using the viewfinder with Prioritize viewfinder selected for monitor mode and then removed his or her eye from the viewfinder before starting playback. - Fixed an issue that ...
Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...
New Features: - The WT-7 wireless transmitter is now supported. Fixed the following issues: - Multiple exposures were not recorded correctly. - Incorrect histograms would be displayed for some images viewed in the RGB histogram display during playback. - If On was selected for Auto distortion control, distortion ...
Changes: - Fixed an issue that prevented additional deletions after multiple shots had been deleted in succession from a single burst of pictures. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The ...
NX Studio software offers a full-fledged suite of intuitive tools for viewing, processing, and editing photos and videos. It combines the photo-and-video-viewing features of ViewNX-i with the photo-processing and retouch tools of Capture NX-D in a single, comprehensive workflow. Not only can it be used to process RAW pictures, ...
Changes: - Fixed an issue that sometimes resulted in incorrect exposure for the first photo taken in live view. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version. ...
Changes:- Added support for the Z 9. When used with the Z 9, the product supports display and selection of shutter speeds as fast as 1/32,000. WR-1 firmware updates can be performed with:- Z 9, Z 7II, Z 7, Z 6II, Z 6, and Z 5 cameras - D6, D5, D4S, ...
Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...
NX Tether software is designed for tethered photography with Nikon cameras connected to your computer. NX Tether can be used to adjust camera settings from and download pictures to the computer, where it can link with other software such as NX Studio. A simple, stripped-down design combined with an uncluttered, intuitive ...
Changes: - Fixed an issue that prevented the camera charging when connected to an AC charging adapter with Off selected for Charge by computer Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector ...