Nikon WR-R11b Remote Controller Firmware 1.02

Details

File size: 0.22 MB
Released: Jun 7, 2023
Downloads: Total: 29 | This Week: 0
Tags:

Nikon WR-R11b Remote Controller Firmware 1.02 - Description

Fixed the following issue:

- Taking photographs in quick succession with a WR-R11b and SB-5000 when connected via radio-controlled Advanced Wireless Lighting would sometimes produce abnormal images.

Viewing the WR-R11b Firmware Version:

- Connect the WR-R11b to the camera.
- Turn the camera on.
- Press the camera MENU button and select [Firmware version] in the [SETUP MENU].
- Check the WR-R11b firmware version (“W”).
- Turn the camera off.

Updating the Firmware:

- Ready one of the following power sources: AC adapter or a fully-charged battery
- Create a folder on the computer hard disk, name it as desired, and download the package there.
- Run the package to extract the firmware file (.bin) to a folder named “WRR11bUpdate”
- Using a card slot or card reader, copy firmware .bin file to a memory card that has been formatted in the camera.
- Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera.
- If the camera has two memory card slots, choose the primary slot.
- Connect the WR-R11b to the camera.
- Turn the camera on.
- Press the camera MENU button to display the menus.
- Select [Firmware version] in the [SETUP MENU] and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.

About Camera Adapter Updates:

Updating to a different firmware version than the one already installed on the adapter can bring various changes such as improved performance and stability, add new features or enhance existing ones, but also various fixes for more or less recurrent issues.

Given the large variety of camera adapters and numerous methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you consider applying the new firmware, even if you are a power user.

If you try to perform the update without knowing all the steps, you risk ending up with a broken device. However, what every upgrade needs is a compatible firmware to be transferred to the adapter (or to the camera) via either a USB cable or a suitable memory card.

That being said, if you consider applying this release and have made sure you're properly informed on the process of performing the upgrade successfully, hit the download button, and update your camera adapter.

Check with our website as often as possible in order to be up to date with the latest releases.

Windows 10 Nikon WR-R11b Remote Controller Firmware 1.02 related drivers

Nikon D4 Camera Firmware 1.10

Modifications enabled in this version - Custom Setting f17: Assign Remote Fn Button has been added. - Support for CompactFlash memory cards with capacities greater than 128 GB has been added. - When AF-ON only was selected for Custom Setting a4 (AF activation) and the AF-ON button was pressed to ...

Nikon Camera NX Studio Utility 1.2.0

NX Studio software offers a full-fledged suite of intuitive tools for viewing, processing, and editing photos and videos. It combines the photo-and-video-viewing features of ViewNX-i with the photo-processing and retouch tools of Capture NX-D in a single, comprehensive workflow. Not only can it be used to process RAW pictures, ...

Nikon Camera Wireless Transmitter Utility 1.11.0

Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...

Nikon COOLPIX S2900 Camera Firmware 1.1

Fixed issues: - Fixed an issue that sometimes resulted in the image in the monitor being out of focus when the camera was turned on. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the ...

Nikon D750 Camera Firmware 1.13

Fixed the following issues:- The SETUP MENU > Time zone and date > Time zone display now shows only the names of major cities in the currently selected zone. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version in ...

Nikon Z 8 Camera Firmware 2.00

Still Photography - Added [Pixel shift shooting] to the photo shooting menu. - Added new picture controls. - Added [Birds] to [AF subject detection options] in the photo shooting menu. - The maximum shooting display zoom ratio is now 400%. - Added [Auto capture] to the photo ...

Nikon D5600 Camera Firmware 1.03

New Features:- The SETUP MENU > Time zone and date > Time zone display now shows only the names of major cities in the currently selected zone. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. ...

Nikon Z 7 Camera Firmware 1.02

Changes:- Fixed an issue that caused the display to flicker if pictures were scrolled during playback zoom after the user had taken pictures using the viewfinder with Prioritize viewfinder selected for monitor mode and then removed his or her eye from the viewfinder before starting playback. - Fixed an issue that ...

Nikon D5100 Camera Picture Control Utility 2.4.15

Picture Control Utility 2 is used to edit and manage Picture Controls. Starting from NEF (RAW) images or custom Picture Controls copied from a camera, you can create and save new custom Picture Controls. Custom Picture Controls created in Picture Control Utility 2 can be used with NX Studio or Camera ...