| File size: | 75.10 MB |
| Released: | Sep 20, 2018 |
| Downloads: | Total: 78 | This Week: 0 |
| Tags: |
- Depending on the state of the subject, the camera would sometimes gradually go out of focus during time-lapse photography, despite the fact that focus would normally be expected to lock with the first shot.
- This package includes two updates: one for the camera itself and the other for the GPS module. The second update will begin when you turn the camera on again after completing the first update.
- Images stored in the camera’s internal memory will be deleted when the firmware is updated. Be sure to back up images stored in the camera’s internal memory before updating the firmware. See the camera manual for instructions on copying images from internal memory to a memory card.
- Turn the camera on.
- Press the camera MENU button to display the menus.
- Press the multi selector left to display menu icons, then highlight SETUP and press OK.
- Highlight Firmware version in the setup menu and press OK to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.
- Create a folder on the computer hard disk and name it as desired.
- Download and extract the package to the folder created.
- Using a card slot or card reader, copy the “firmware” folder to a memory card that has been formatted in the camera.
- Insert the memory card into the camera and turn the camera on.
- Select Firmware version in the setup menu and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.
Changes:- Fixed an issue that caused the display to flicker if pictures were scrolled during playback zoom after the user had taken pictures using the viewfinder with Prioritize viewfinder selected for monitor mode and then removed his or her eye from the viewfinder before starting playback. - Fixed an issue that ...
Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...
NX Tether software is designed for tethered photography with Nikon cameras connected to your computer. NX Tether can be used to adjust camera settings from and download pictures to the computer, where it can link with other software such as NX Studio. A simple, stripped-down design combined with an uncluttered, intuitive ...
New Features: - The WT-7 wireless transmitter is now supported. Fixed the following issues: - Multiple exposures were not recorded correctly. - Incorrect histograms would be displayed for some images viewed in the RGB histogram display during playback. - If On was selected for Auto distortion control, distortion ...
Changes: - Fixed an issue that prevented additional deletions after multiple shots had been deleted in succession from a single burst of pictures. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The ...
Changes:- Added support for the Z 9. When used with the Z 9, the product supports display and selection of shutter speeds as fast as 1/32,000. WR-1 firmware updates can be performed with:- Z 9, Z 7II, Z 7, Z 6II, Z 6, and Z 5 cameras - D6, D5, D4S, ...
Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...
This package contains the files needed for installing Wireless Transmitter Utility to adjust network settings. If your computer is currently running an older version of this driver, updating may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible, we do not recommend applying this ...
Fixed the following issues:- Waking the camera by pressing a control such as the AF-ON button after the standby timer had expired would in very rare instances cause camera settings to change or shooting would to start without the shutter-release button being pressed. - The shutter release would in very rare ...
Changes: - Fixed an issue that sometimes resulted in incorrect exposure for the first photo taken in live view. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version. ...