... if you experience any problems caused by this firmware update. - Do not turn the unit ... USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them. How to Use the Updater: 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks ...
... [Settings] Fixed minor bugs. How to Use the Updater: 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks ... " 192.168.1.150 , 255.255.255.0 " then the updater will _not_ work properly. In this case, reconfigure ... will be on the same subnet and the updater will work properly. 2. Close all applications. ...
... drive was connected to the TeraStation while the firmware is updated to version 5.72 or 5.76, the USB drive became unwritable. If your TeraStation’s firmware version is either 5.72 or 5.76, update the firmware to the latest version with the USB drive ... to resolve the issue. How to Use the Updater: 1. Connect the TeraStation properly and configure the ...
... if you experience any problems caused by this firmware update. - Do not turn the unit off ... USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them. How to Use the Updater: 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks ...
... if you experience any problems caused by this firmware update. - Do not turn the unit ... USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them. How to Use the Updater: 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks ...
... if you experience any problems caused by this firmware update. - Do not turn the unit ... USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them. How to Use the Updater: 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks ...
... if you experience any problems caused by this firmware update. - Do not turn the unit ... USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them. How to Use the Updater: 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks ...
... shows an unknown error. How to Use the Updater: 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks ... " 192.168.1.150 , 255.255.255.0 " then the updater will _not_ work properly. In this case, reconfigure ... will be on the same subnet and the updater will work properly. 2. Close all applications. ...
... [Settings] Fixed minor bugs. How to Use the Updater: 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks ... " 192.168.1.150 , 255.255.255.0 " then the updater will _not_ work properly. In this case, reconfigure ... will be on the same subnet and the updater will work properly. 2. Close all applications. ...
... if you experience any problems caused by this firmware update. - Do not turn the unit off ... USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them. How to Use the Updater: 1. Connect the TeraStation properly and configure the TeraStation and a computer to run the updater on the same network subnet. The subnet masks ...