... type from CB/EB. - Updated iFlashV tool “/jbc” command support. - Allowed for "Failsafe Watchdog" setup option. ... the Recovery BIOS (.BIO) file to a USB portable device. - Plug the USB device into a USB port of the target Intel NUC. - Turn ... save the Recovery BIOS (.BIO) file to a portable USB device. - Plug the USB device ...
... type from CB/EB. - Updated iFlashV tool “/jbc” command support. - Allowed for "Failsafe Watchdog" setup option. ... the Recovery BIOS (.BIO) file to a USB portable device. - Plug the USB device into a USB port of the target Intel NUC. - Turn ... save the Recovery BIOS (.BIO) file to a portable USB device. - Plug the USB device ...
... down. - Firmware: When the admin queue command was executed to get the PHY recovery clock (0x0631), it was missing the Port number in the AQC. - Firmware: The ... SDP PINs. - Firmware: The NC-SI OEM command (0x4B) no longer fails. - Firmware: Fixed ... has not been properly mapped from the physical port to logical to get interface sensors. - ...
... down. - Firmware: When the admin queue command was executed to get the PHY recovery clock (0x0631), it was missing the Port number in the AQC. - Firmware: The ... SDP PINs. - Firmware: The NC-SI OEM command (0x4B) no longer fails. - Firmware: Fixed ... has not been properly mapped from the physical port to logical to get interface sensors. - ...
... Intel Ethernet Connection X722/Intel Ethernet Network Adapter X722 ports and using an OS or kernel with an ... reboot of the server. - Linux Driver: The commands ethtool -C [rx|tx]-frames are not supported by the ... to default when the queue settings of a port are modified using the ethtool -L ethx combined ...
... Intel Ethernet Connection X722/Intel Ethernet Network Adapter X722 ports and using an OS or kernel with an ... abnormal reboot of the server. - LinuxDriver: The commands ethtool -C [rx|tx]-frames are not supported by the ... to default when the queue settings of a port are modified using the ethtool -L ethx combined ...
... where a performance issue caused the GNSS write commands to be delayed and not delivered until the next commands appeared. - Resolved an issue where modifying inner ... showed the wrong media type as other by command "ethtool port-name." - Resolved an issue where unloading a driver ... deferred binding resource Id. - A "Cannot initialize port" failure occurs when running nvmupdate 1.39.32.6 in SLES15SP3, ...
... where a performance issue caused the GNSS write commands to be delayed and not delivered until the next commands appeared. - Resolved an issue where modifying inner ... showed the wrong media type as other by command "ethtool port-name." - Resolved an issue where unloading a driver ... deferred binding resource Id. - A "Cannot initialize port" failure occurs when running nvmupdate 1.39.32.6 in SLES15SP3, ...
... when creating new VLAN devices or setting the port VLAN. - Added Azure Stack HCI 23H2 OS ... upon creating new VLAN devices or setting the port VLAN for the VF device, and the irdma ... in switch mode, setting a node's/leaf's tx_priority ('devlink port function rate set >>pci/<PF_PCI/<node_name tx_priority 1') along with ...
... down. - Firmware: When the admin queue command was executed to get the PHY recovery clock (0x0631), it was missing the Port number in the AQC. - Firmware: The ... SDP PINs. - Firmware: The NC-SI OEM command (0x4B) no longer fails. - Firmware: Fixed ... has not been properly mapped from the physical port to logical to get interface sensors. - ...