| File size: | 33.50 MB |
| Released: | Oct 11, 2016 |
| Downloads: | Total: 126 | This Week: 0 |
| Tags: |
- Fixed the following issues, which would in rare cases occur when RAW+JPEG photographs were taken with write-enabled cards inserted in both the XQD and CompactFlash card slots, RAW primary - JPEG secondary selected for Secondary slot function in the SHOOTING MENU, and On selected for Network > Options > Auto send in the SETUP MENU.
- The camera would sometimes freeze or restart after users had pressed the shutter-release button all the way down without first activating the standby timer and then allowed the timer to expire or turned the camera off without first reactivating the timer.
- If the shutter-release button was pressed all the way down to begin shooting with the standby timer off, the first shot would sometimes neither be marked for transfer nor uploaded.
- Turn the camera on.
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.
- Download and run the file.
- Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
- Insert the memory card into the primary slot on the camera and turn the camera on.
- Select Network in the SETUP MENU and confirm that Disable is selected for Network connection.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.
Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
Changes: - Fixed an issue that prevented additional deletions after multiple shots had been deleted in succession from a single burst of pictures. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The ...
Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...
Recall shooting functions:- Added Recall shooting functions to the functions that can be assigned to camera controls. Holding the selected control recalls previously-saved exposure settings (including shutter speed and aperture), a feature that can for example be used to switch rapidly between scenes that require different exposures. - Recall shooting ...
This package contains the files needed for installing the Wireless Transmitter utility to adjust network settings. If your computer is currently running an older version of this utility, updating may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible, we do not recommend applying ...
NX Tether software is designed for tethered photography with Nikon cameras connected to your computer. NX Tether can be used to adjust camera settings from and download pictures to the computer, where it can link with other software such as NX Studio. A simple, stripped-down design combined with an uncluttered, intuitive ...
Changes: - Fixed an issue that sometimes caused the camera to stop responding when attached to a WR?R10 wireless remote controller running firmware version 3.00. Updating the Camera Firmware: - Save and run the downloadable file to create a “D810Update” folder. - Using a card slot or card reader, copy ...
Fixed the following issues:- If the camera detected faces during still photography or movie recording at the settings listed below, it would in very rare instances begin to respond more slowly, display an error, or stop responding altogether. Still Photography: - Auto-area AF selected for AF-area mode in the PHOTO ...
New Features: - Added support for the iOS version of SnapBridge. - Changed some help text. Fixed the following issues: - Images would not display correctly if playback zoom was used during image review. - The focus point display would not light if the shutter-release button was pressed ...
New Features: - Fixed an issue that prevented the touch-shutter option releasing the shutter when autofocus was used during live view with an SB-800 flash unit attached. - Changed the items checked when image sensor cleaning was performed using the SETUP MENU > Clean image sensor > Clean now option. ...
Changes:- When users attempted to pair the camera with the smart device using the SnapBridge app under iOS 13, pairing would end in failure and a message to that effect would be displayed. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to ...