Nikon D6 Camera Firmware 1.30

Details

File size: 53.50 MB
Released: Jun 15, 2021
Downloads: Total: 39 | This Week: 0
Tags:

Nikon D6 Camera Firmware 1.30 - Description

Fixed the following issues:

- A new option, Keep exp. when f/ changes, has been added to the Custom Settings menu at position b8. When Off is selected for ISO sensitivity settings > Auto ISO sensitivity control in the photo shooting menu in mode M, actions such as switching to a lens with a different aperture range may cause unintended changes to aperture. If an option other than Off is selected for Keep exp. when f/ changes, the camera will adjust shutter speed or ISO sensitivity to maintain exposure at its current value.
- Changes have been made to improve the reliability of the autofocus operation.

Other actions to which automatic exposure maintenance applies include:

- adjusting zoom on lenses that have different values for maximum aperture at maximum and minimum zoom,
- attaching a teleconverter, and
- changing the focus distance when a micro lens is attached.

Viewing the Camera Firmware Version:

- Turn the camera on.
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.
- Save the downloadable file to the newly-created folder.
- Run the package to extract a .bin file (the camera firmware) to a folder named “D6Update”
- Using a card slot or card reader, copy .bin file to a memory card that has been formatted in the camera.
- Insert the memory card into the Slot 1 on the camera and turn the camera on.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Windows 10 Nikon D6 Camera Firmware 1.30 related drivers

Nikon WT-7 Wireless Transmitter Utility 1.9.6

Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...

Nikon Df Camera Picture Control Utility 2.4.15

Picture Control Utility 2 is used to edit and manage Picture Controls. Starting from NEF (RAW) images or custom Picture Controls copied from a camera, you can create and save new custom Picture Controls. Custom Picture Controls created in Picture Control Utility 2 can be used with NX Studio or Camera ...

Nikon COOLPIX P900 Camera Firmware 1.4

Changes: - In certain locations, location data could sometimes be inaccurate, unavailable, or unreliable. - The display would sometimes fail to follow changes to camera orientation (portrait to landscape or vice versa). - Interval timer photography would end after 1800 shots. - The camera would sometimes stop responding to controls other ...

Nikon COOLPIX AW120 Camera Firmware 1.2

Changes: - Fixed an issue that in certain locations, location data could sometimes be inaccurate, unavailable, or unreliable. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left to display menu icons, ...

Nikon Camera NX Studio Utility 1.2.0

NX Studio software offers a full-fledged suite of intuitive tools for viewing, processing, and editing photos and videos. It combines the photo-and-video-viewing features of ViewNX-i with the photo-processing and retouch tools of Capture NX-D in a single, comprehensive workflow. Not only can it be used to process RAW pictures, ...

Nikon D3S Camera Picture Control Utility 2.4.15

Picture Control Utility 2 is used to edit and manage Picture Controls. Starting from NEF (RAW) images or custom Picture Controls copied from a camera, you can create and save new custom Picture Controls. Custom Picture Controls created in Picture Control Utility 2 can be used with NX Studio or Camera ...

Nikon D700 Camera Picture Control Utility 2.4.15

Picture Control Utility 2 is used to edit and manage Picture Controls. Starting from NEF (RAW) images or custom Picture Controls copied from a camera, you can create and save new custom Picture Controls. Custom Picture Controls created in Picture Control Utility 2 can be used with NX Studio or Camera ...

Nikon COOLPIX B700 Camera Firmware 1.2

Changes: - Fixed an issue that resulted in unreliable connections between the camera and the iOS 10.2 version of the SnapBridge app. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left ...

Nikon D600 Camera Firmware 1.03

Added support for the following features of AF-P lenses: - If the standby timer expires after the camera has focused, the focus position will not change when the timer is reactivated. - In manual focus mode, the focus indicator in the viewfinder (or in live view, the focus point selected in ...