Nikon D5 Camera Firmware 1.20

Details

File size: 44.00 MB
Released: Jul 12, 2017
Downloads: Total: 60 | This Week: 0
Tags:

Nikon D5 Camera Firmware 1.20 - Description

Changes:

- Added two new AF-area modes: group-area AF (HL) and group-area AF (VL). The user selects a row (HL) or column (VL) of focus points; when AF-C is selected for focus mode, the camera will give priority to the point in the selected row or column containing the subject closest to the camera.

- Updated the photo info display to show the color temperature for photos taken with Auto selected for white balance.

- Added an Exif tag listing the difference between the local time zone and UTC, part of the Exif 2.31 specification.

- Added the support for the following features of AF-P lenses: If the standby timer expires after the camera has focused, the focus position will not change when the timer is reactivated.

- Added the support for the following features of AF-P lenses: In manual focus mode, the focus indicator in the viewfinder (or in live view, the focus point selected in the monitor) will flash to show that infinity or the minimum focus distance has been reached by rotating the focus ring.

- Changed the checks performed when Clean image sensor > Clean now is selected in the SETUP MENU. We recommend that you perform image sensor cleaning after updating the firmware.

- Reduced the amount of time needed to connect to hidden SSIDs when WPA-PSK or WPA2-PSK is selected for Authentication.

- Updated some help text.

Fixed the following issues:

- The higher the amount of Active D Lighting selected when optional flash units were used with auto aperture (AA), non-TTL auto (A), or distance-priority manual (GN) flash mode, the more the resulting images would be underexposed.

- Changes to exposure (including exposure compensation) would not be reflected in the photo live view exposure preview while the display was zoomed in.

- Photo live view display WB could not be selected in the i-button menu while the exposure preview was displayed in photo live view.

- Taking long bursts of photos with On selected for Network > Options > Auto send would sometimes drastically slow the recording of data to the memory card.

Notice:

- Users of the software listed below will need to update to the following versions to support the changes in this firmware update: homepage, homepage

Viewing the Camera Firmware Version:

- Turn the camera on.

- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.

- Check the camera firmware version.

- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.

- Download and run the firmware to extract the following file to a folder named “D5Update”

- Using a card slot or card reader, copy .bin to a memory card that has been formatted in the camera.

- Insert the memory card into the Slot 1 on the camera and turn the camera on.

- Select Network in the SETUP MENU and confirm that OFF is selected for Network connection.

- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.

- Once the update is complete, turn the camera off and remove the memory card.

- Confirm that the firmware has been updated to the new version. 

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device's overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera's firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device's performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera's firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn't intended to be destructive, but still, it's best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don't use the camera's buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device's update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product's installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don't miss the update that will boost your camera's performance.

Windows 10 Nikon D5 Camera Firmware 1.20 related drivers

Nikon WT-7 Wireless Transmitter Utility 1.9.6

Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...

Nikon Df Camera Picture Control Utility 2.4.15

Picture Control Utility 2 is used to edit and manage Picture Controls. Starting from NEF (RAW) images or custom Picture Controls copied from a camera, you can create and save new custom Picture Controls. Custom Picture Controls created in Picture Control Utility 2 can be used with NX Studio or Camera ...

Nikon COOLPIX P900 Camera Firmware 1.4

Changes: - In certain locations, location data could sometimes be inaccurate, unavailable, or unreliable. - The display would sometimes fail to follow changes to camera orientation (portrait to landscape or vice versa). - Interval timer photography would end after 1800 shots. - The camera would sometimes stop responding to controls other ...

Nikon COOLPIX AW120 Camera Firmware 1.2

Changes: - Fixed an issue that in certain locations, location data could sometimes be inaccurate, unavailable, or unreliable. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left to display menu icons, ...

Nikon Camera NX Studio Utility 1.2.0

NX Studio software offers a full-fledged suite of intuitive tools for viewing, processing, and editing photos and videos. It combines the photo-and-video-viewing features of ViewNX-i with the photo-processing and retouch tools of Capture NX-D in a single, comprehensive workflow. Not only can it be used to process RAW pictures, ...

Nikon D3S Camera Picture Control Utility 2.4.15

Picture Control Utility 2 is used to edit and manage Picture Controls. Starting from NEF (RAW) images or custom Picture Controls copied from a camera, you can create and save new custom Picture Controls. Custom Picture Controls created in Picture Control Utility 2 can be used with NX Studio or Camera ...

Nikon D700 Camera Picture Control Utility 2.4.15

Picture Control Utility 2 is used to edit and manage Picture Controls. Starting from NEF (RAW) images or custom Picture Controls copied from a camera, you can create and save new custom Picture Controls. Custom Picture Controls created in Picture Control Utility 2 can be used with NX Studio or Camera ...

Nikon COOLPIX B700 Camera Firmware 1.2

Changes: - Fixed an issue that resulted in unreliable connections between the camera and the iOS 10.2 version of the SnapBridge app. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the multi selector left ...

Nikon D600 Camera Firmware 1.03

Added support for the following features of AF-P lenses: - If the standby timer expires after the camera has focused, the focus position will not change when the timer is reactivated. - In manual focus mode, the focus indicator in the viewfinder (or in live view, the focus point selected in ...