NIKKOR Z MC 105mm f/2.8 VR S Lens Firmware 1.10

Details

File size: 0.40 MB
Released: Aug 4, 2022
Downloads: Total: 56 | This Week: 0
Tags:

NIKKOR Z MC 105mm f/2.8 VR S Lens Firmware 1.10 - Description

Changes:

- Added support for linear focus ring rotation during manual focus: when an option other than [Non-linear] is selected for [Focus ring rotation range] * in the camera [CUSTOM SETTINGS MENU], rotating the ring the selected amount takes focus from the minimum distance to infinity regardless of rotation speed.
- Added support for [Switch focus/control ring roles] * in the camera [CUSTOM SETTINGS MENU].

Viewing the Lens Firmware Version:

- Attach the lens to the camera and turn the camera on.
- Press the camera MENU button and select SETUP MENU > Firmware version to display the camera and lens firmware versions.
- Check the firmware version.
- Turn the camera off.

Updating the Lens Firmware:

- Create a folder on the computer hard disk, name it as desired, and dwnload the firmware there.
- Run the package to extract the lens firmware file (.bin).
- Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.
- Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
- Insert the memory card into the camera and turn the camera on.
- Select SETUP MENU > Firmware version and follow the on-screen instructions to perform the firmware update.
- When a message is displayed stating that the update is complete, turn the camera off and remove the memory card.
- Turn the camera on and confirm that the firmware has been updated to the new version.

About Lens Updates:

Upgrading or downgrading your lens to a different firmware version might enhance the unit's overall performance and stability, and could also improve some of the lenses' features (a good example would be faster autofocus speed).

In order to apply a firmware properly, other than the one already installed, you should check that the lenses are connected to the camera body, copy the compatible update on a memory card, and insert it into the camera.

From the device's menu, browse to the Firmware Upgrade section, and enable the new firmware. Since each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, you must make sure that you read the product's installation guide.

Therefore, if you consider installing this present release, click on the download button to get the firmware, and apply it. Moreover, don't forget to check our website constantly so that you don't miss any of the future versions.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Windows 10 NIKKOR Z MC 105mm f/2.8 VR S Lens Firmware 1.10 related drivers

Nikon Z 7 Camera Firmware 1.02

Changes:- Fixed an issue that caused the display to flicker if pictures were scrolled during playback zoom after the user had taken pictures using the viewfinder with Prioritize viewfinder selected for monitor mode and then removed his or her eye from the viewfinder before starting playback. - Fixed an issue that ...

Nikon Z fc Camera Firmware 1.40

Changes:- Added support for the iOS edition of NX MobileAir. Use NX MobileAir version 1.1.3 or later. - Added support for MC-N10 remote grips. - Added support for the power zoom feature available on some lenses. - Focus-point selection for self-portrait mode using an ML-L7 has been improved. Viewing the Camera ...

Nikon Camera Wireless Transmitter Utility 1.11.0

Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...

Nikon Z 7 Camera Firmware 2.01

Fixed the following issues:- If the camera detected faces during still photography or movie recording at the settings listed below, it would in very rare instances begin to respond more slowly, display an error, or stop responding altogether. Still Photography: - Auto-area AF selected for AF-area mode in the PHOTO ...

Nikon D810 Camera Firmware 1.12

New Features: - The WT-7 wireless transmitter is now supported. Fixed the following issues: - Multiple exposures were not recorded correctly. - Incorrect histograms would be displayed for some images viewed in the RGB histogram display during playback. - If On was selected for Auto distortion control, distortion ...

Nikon 1 J5 Camera Firmware 1.01

Changes: - Fixed an issue that prevented additional deletions after multiple shots had been deleted in succession from a single burst of pictures. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup menu. - The ...

Nikon D3300 Camera Firmware 1.02

Changes: - Fixed an issue that sometimes resulted in incorrect exposure for the first photo taken in live view. Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version. ...

Nikon WT-7 Wireless Transmitter Utility 1.9.6

Use the Wireless Transmitter Utility to adjust network settings and the like for WT-7, WT-6, WT-5, and WT-4 wireless transmitters, UT-1 communications units, and cameras with built-in Wi-Fi and/or Ethernet. The software for the WT-4 was called the WT-4 Setup Utility, but now that it supports the WT-5 and other devices ...

Nikon Camera NX Studio Utility 1.6.0

NX Studio software offers a full-fledged suite of intuitive tools for viewing, processing, and editing photos and videos. It combines the photo-and-video-viewing features of ViewNX-i with the photo-processing and retouch tools of Capture NX-D in a single, comprehensive workflow. Not only can it be used to process RAW pictures, but ...