Intel RMS25CB080 RAID Module SAS Hardware RAID Driver 6.714.18.00

Details

File site: 2.50 MB
Released: Sep 17, 2019
Downloads: Total: 0 | This Week: 0
Tags:

Intel RMS25CB080 RAID Module SAS Hardware RAID Driver 6.714.18.00 - Description

Changes:

- Driver needs to handle corner condition While processing continuous IO completion

Installs RAID device driver on existing Windows 2012/8 system:

1. Start the Windows installation by booting from the Windows 2012/8/2008/7 DVD-ROM. The system BIOS must support booting from a DVD-ROM. BIOS settings might require changes to allow DVD-ROM booting.
2. When the screen displays: "Where do you want to install Windows?", select 'Load Driver', then click Next.
3. The system prompts for a Load Driver dialogue to ask for the manufacturer-supplied hardware driver disk. Insert the driver diskette containing the Windows 2012/8/7/2008 device driver, and press <Enter>.
NOTE: You may ask to supply the appropriate INF path if you want to load driver from a USB flash drive.
4. Select the Windows device driver from the menu by highlighting it, then click Next.
5. Remove the USB flash drive. Follow the Microsoft Windows installation procedure to continue the OS installation.

Installs RAID device driver on existing Windows 7/2008 system:

1. Boot Windows.
2. Under Control Panel, select Administrative Tools -> Computer Management. Then Select Device Manger and identify the new add-in device. Double click the device, then select the Drier Page, click Update Driver to install the new driver.
3. Insert the driver diskette into the A: drive.
4. Click the 'Browse My computer for driver software' button.
5. Click the 'Browse' button to specify the driver disk location A:
6. Click the 'Next' button then system will search driver in the specified location and install the driver automatically.
7. Click the 'Close' button to complete the driver installation.
8. Repeat this process for all the controllers on your system.

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don't forget to constantly check with our website so that you don't miss a single new release.

Windows 10 Intel RMS25CB080 RAID Module SAS Hardware RAID Driver 6.714.18.00 related drivers

Intel Chipset Device Driver 10.1.1.14

Features Added in Build 10.1.1.14:- Skylake (Intel Xeon E3 - 1200) and Skylake (Intel Xeon E3 - 1200/1500 v5/6th Gen Intel Core) created special devices groups. - SPT-LP (Mobile 6th Generation Intel Processor Family I/O) created special devices groups. - SPT-H (Intel 100 Series/C230 Series Chipset Family) created special devices ...

Intel Turbo Boost Max Technology 3.0 Driver 1.0.0.1029 for Windows 10 64-bit

The package provides the installation files for Intel Turbo Boost Max Technology 3.0 Driver version 1.0.0.1029. If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version. Take into consideration that is not recommended to install the ...

Intel 6/C200 Series Chipset USB Host Controller Driver 10.1.1.12 for Windows 10

The package provides the installation files for Intel 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26 Driver version 10.1.1.12. If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version. Take into consideration ...

Intel ME Driver 11.0.4.1186

The Intel Management Engine (Intel ME) software components that need to be installed depend on the system's specific hardware and firmware features. The installer detects the system's capabilities and installs the relevant drivers and applications.To install this package please do the following: - Save the downloadable package on an accessible location ...

Intel Driver Update Utility 2.4.0.15

New Intel Driver Update Utility downloadable version enables users to scan their computing devices for the latest drivers available from Intel. Products supported with release: Graphics, Chipsets (Chipset INF), Wireless, Intel Desktop Boards, Intel NUCs, Intel Compute Sticks.Changes:- Update Intel Product Improvement Program module to align with other instances of ...

Intel 6/C200 Series Chipset USB Host Controller Driver 10.1.1.11 for Windows 10

The package provides the installation files for Intel 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26 Driver version 10.1.1.11. If the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version. Take into consideration ...