Buffalo LS220DR NAS Firmware 1.76

Details

File site: 198.60 MB
Released: Sep 2, 2021
Downloads: Total: 5 | This Week: 5
Tags:

Buffalo LS220DR NAS Firmware 1.76 - Description

Added and Modified Features:

- [Drives]: Modified the drive check process that occurs at startup for the LS200 series LinkStations (but not for the LS210D models).

Caution:

- Please consult your local technical support representative if you experience any problems caused by this firmware update.
- Do not turn the unit off until the update is finished. It will take several minutes. You will receive a message when the update is finished.
- USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect them.

How to Use the Updater:

1. Connect the LinkStation properly and configure the LinkStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
For example, if the IP address and subnet mask of the computer are
" 192.168.0.10 , 255.255.255.0 "
and the IP address and subnet mask of the LinkStation are
" 192.168.1.150 , 255.255.255.0 "
then the updater will _not_ work properly.
In this case, reconfigure the LinkStation's IP address and subnet mask to
" 192.168.0.150 , 255.255.255.0 ".
Then they will be on the same subnet and the updater will work properly.
2. Close all applications. Also, stop or exit any firewall software.
3. Extract the downloaded file and run ""LSUpdater.exe". When a LinkStation is detected, an update window will open.
4. Select the LinkStation to update if multiple LinkStation are connected.
5. Click "Update" and enter the LinkStation's admin password.
6. Click "OK".
7. Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.
8. When the update finishes, a message will be displayed.

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system's overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe either. Failing to perform a software update can cause serious malfunctions to the network storage.

So, before you even consider applying this release, carefully read the installation guide and initiate the process only when you have understood and completely familiarized yourself with all the steps.

Moreover, it would be best if you take into account using a UPS unit (Uninterruptible Power Supply) to perform this task, because no power disruption should affect the upgrade.

With all these aspects in mind, after you have read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check back with our website in order to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Windows 10 Buffalo LS220DR NAS Firmware 1.76 related drivers

Buffalo LinkStation LS220DE Firmware Updater 1.63

Version History Added and Modified Features: - Improved recognition accuracy when connecting USB drives. Bug Fixes: - Fixed a bug where access restriction settings were disabled when restarting the LinkStation after configuring domain user access restrictions for the shared folders. If this occurs, settings will not be restored even ...

Buffalo TS3200D NAS Firmware 1.71

Bug Fixes: - System: Fixed a bug where the TeraStation was disconnected from the network if a shared folder on this TeraStation was configured as a destination for saving recording data for the surveillance camera. - Failover: Fixed a bug where newly-created folders or files saved on the main TeraStation ...

Buffalo TS5410RN NAS Firmware 3.11

Added and Modified Features - Backup: rsync-compatible NAS devices can now be used for backup. The shared folders in the rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. - Subfolders' Access Restrictions: Modified to exclude the trashbox folder when running ...

Buffalo TS3210DN NAS Firmware 3.11

Added and Modified Features - Backup: rsync-compatible NAS devices can now be used for backup. The shared folders in the rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. - Subfolders' Access Restrictions: Modified to exclude the trashbox folder when running ...

Buffalo TS51210RH NAS Firmware 3.11

Added and Modified Features - Backup: rsync-compatible NAS devices can now be used for backup. The shared folders in the rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. - Subfolders' Access Restrictions: Modified to exclude the trashbox folder when running ...

Buffalo TS3410DN NAS Firmware 3.11

Added and Modified Features - Backup: rsync-compatible NAS devices can now be used for backup. The shared folders in the rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. - Subfolders' Access Restrictions: Modified to exclude the trashbox folder when running ...

Buffalo TS5210DN NAS Firmware 3.11

Added and Modified Features - Backup: rsync-compatible NAS devices can now be used for backup. The shared folders in the rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. - Subfolders' Access Restrictions: Modified to exclude the trashbox folder when running ...

Buffalo TS5210DF NAS Firmware 3.11

Added and Modified Features - Backup: rsync-compatible NAS devices can now be used for backup. The shared folders in the rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. - Subfolders' Access Restrictions: Modified to exclude the trashbox folder when running ...

Buffalo TS3410RN NAS Firmware 3.11

Added and Modified Features - Backup: rsync-compatible NAS devices can now be used for backup. The shared folders in the rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. - Subfolders' Access Restrictions: Modified to exclude the trashbox folder when running ...

Buffalo TS5410DN NAS Firmware 3.11

Added and Modified Features - Backup: rsync-compatible NAS devices can now be used for backup. The shared folders in the rsync-compatible NAS devices can be selected as the source and destination folders when backing up to/from the TeraStation. - Subfolders' Access Restrictions: Modified to exclude the trashbox folder when running ...